Automobile Stainless Steel Flexible Pipe, also known as automobile exhaust pipe hose, is installed in the exhaust pipe between the engine exhaust manifold and the muffler, so that the entire exhaust system is flexibly connected, so as to play a role in vibration and noise reduction, convenient installation and prolonging the life of the exhaust noise reduction system. It is mainly used for light vehicles, mini vehicles and buses, its structure is a double-layer bellows covered with steel wire mesh sleeve, the structure of the jacket ring at both ends of the straight edge section, in order to make the sound reduction effect better, the bellows can be equipped with expansion joints or net sleeves. The material is mainly stainless steel 304, and the ferrule and pipe material can be stainless steel or aluminized steel.
The Role Of Titanium Exhaust Car Flexible Pipe
1. Installed in the engine and muffler, absorbing the energy of the relative movement of the engine and exhaust pipe.
2. The product is used to reduce engine noise and vibration.
3. The product can absorb the heat expansion tube muffler.
4. Compensator for exhaust deviation.
5. The product can reduce air pollution.
6. Extend the service life of the exhaust system.
Titanium Exhaust Car Flexible Pipe Structure
1. No inner mesh: bellows + outer net + bell mouth (straight circle).
2. Inner and outer network: inner network + bellows + outer network + bell mouth (straight circle).
3. Expansion knot: expansion knot + bellows + outer net + bell mouth (straight circle) + expansion joint.
4. Takeover: inner network + bellows + outer network + bell mouth (straight circle) + receiver.
3. Characteristics of titanium exhaust bellows.
1. It is suitable for connecting the tailpipes of various models.
2. It can make the parts have a high degree of flexibility.
3. Increase the height of the ripple to enhance the effect of absorbing vibration.
4. The material of 1Cr18Ni9Ti is used to prolong the service life of the product.
5. Specifications: pressed at both ends, with stainless steel mesh sleeve and stainless steel expansion joint.
Titanium Exhaust Bellows Diameter: 28mm, 32mm, 38mm, 42mm, 45mm, 51mm, 54mm, 57mm, 63mm, 76mm, 89mm, 102mm, length 4", 6", 8", 10", 12".
Press-fit at both ends, including inner and outer mesh sleeves, and stainless steel expansion joints included
Titanium Exhaust Bellows Diameter: 28mm, 32mm, 38mm, 42mm, 45mm, 51mm, 54mm, 57mm, 63mm, 76mm, 89mm, 102mm, length 6", 8", 10", 12", 14".
Automobile Exhaust Bellows Are Available In The Following Specifications
BEL: Bellow + Cap.
B–O/B: Bellow (bellows) + Cap + Outer-Braid (external network).
B–I/B: Bellow + Cap + Outer-Braid + Inner-Braid.
B–I/L: Bellow + Cap + Outer-Braid + Interlock.
Hot Tags: stainless steel car flexible pipe, China stainless steel car flexible pipe manufacturers, suppliers, factory, titanium aluminide alloy, Titanium Exhaust for Mclaren, titanium manganese alloy, titanium and iron alloy, titanium and tungsten alloy, 2 5 titanium exhaust tubing
