1,Nitric Acid
Nitric acid is a kind of oxidizing acid, titanium in nitric acid, its surface maintains a dense layer of oxide film. Therefore, titanium has very good corrosion resistance in nitric acid. The corrosion rate of titanium increases with the temperature of the nitric acid solution. Temperature in 190 ~ 240 ℃, concentration in 20% ~ 70%, the corrosion rate of up to 10mm / a. But in the nitric acid solution to add a small amount of silicone compounds, can inhibit high temperature nitric acid corrosion of titanium; for example, in 40% of the high-temperature nitric acid solution added silicone oil, the corrosion rate can be reduced to almost equal to zero. There is also information that below 500 ℃, titanium has a high degree of corrosion resistance in 40% to 80% of the nitric acid solution and steam. In fuming nitric acid, when containing Nitrogen dioxide in more than 2%, due to insufficient water content caused by a strong exothermic reaction, which led to an explosion.
2,Sulfuric Acid
Sulfuric acid is a strong reducing acid, titanium has a certain degree of corrosion resistance to low temperature and low concentration of sulfuric acid solution. At 0 ℃, it can resist corrosion of sulfuric acid with a concentration of up to 20%, and the corrosion rate increases as the concentration of acid and temperature increases. Therefore, the stability of titanium in sulfuric acid is poor, even in dissolved oxygen at room temperature, titanium can only resist 5% sulfuric acid corrosion. At 100 ℃, titanium can only withstand 0.2% sulfuric acid corrosion. Chlorine on the corrosion of titanium in sulfuric acid has an inhibitory effect, but at 90 ℃, sulfuric acid concentration of 50%, chlorine, on the contrary, caused by titanium corrosion acceleration, and even caused by fire. Titanium corrosion resistance in sulfuric acid can be improved by passing air, nitrogen or adding oxidizers and high value heavy metal ions to the solution, therefore, titanium in sulfuric acid has little practical value.
3,Alkaline Solution
Titanium has good corrosion resistance in most alkaline solutions, the corrosion rate increases gradually with the concentration and temperature of the solution, in the presence of oxygen, ammonia or carbon dioxide in the lye, will accelerate the corrosion of titanium, in the lye containing hydrogen oxide, titanium's corrosion resistance is very poor. However, the corrosion resistance in sodium hydroxide solution is better than potassium hydroxide, even in high temperature and high concentration of sodium hydroxide solution also has a strong corrosion resistance. Such as titanium at 130 ℃, 73% sodium hydroxide solution corrosion rate of only 0.18mm / a, titanium and other metals is different from it in sodium hydroxide solution will not produce stress corrosion rupture, but long-term exposure may produce hydrogen embrittlement. Therefore, titanium in caustic soda and other concentrations of alkaline solutions should be used in the temperature ≤ 93.33 ℃.
4,Chlorine Gas
The stability of titanium in chlorine gas depends on the water content in chlorine. However, it is not corrosion-resistant in dry chlorine gas, and there is a danger of causing combustion. Therefore, titanium used in chlorine gas must maintain a certain water content, in chlorine gas to maintain the titanium passivation of the water content required with the pressure, flow rate, temperature and other factors related to chlorine gas.
5,Organic Media
Titanium in gasoline, toluene, phenol, formaldehyde, trichloroethane, acetic acid, citric acid, monochloroacetic acid, etc. has high corrosion resistance. In the boiling point and not inflated, titanium in 25% of the following formic acid will be severely corroded, in a solution containing acetic anhydride, titanium is not only subject to severe overall corrosion and will produce pore corrosion. For many organic synthesis process in contact with complex organic media such as in the production of propylene oxide, phenol, acetone, chloroacetic acid and other chemical media, titanium corrosion resistance is better than stainless steel and other structural materials.
