3D Printing Combined With Shape Memory Alloys: Driving Active Interlocking Lattices Metamaterials

Nov 14, 2024

Leave a message

A team of researchers from Texas A&M University and Sandia National Laboratories recently published an important study on Interlocking Lattices Metamaterials (ILM) in the journal Materials & Design, titled Active interlocking metasurfaces enabled by shape memory alloys. This research utilizes Shape Memory Alloys (SMAs) and 3D printing to develop a novel active Interlocking Lattices Metamaterials technology, which is expected to revolutionize the fields of aerospace, robotics and biomedical devices.

 

Research Background

 

Interlocking Lattices Metamaterials are an emerging joining technology that transmits forces and restricts motion between neighboring objects through a series of interlocking characteristic structures. Conventional Interlocking Lattices Metamaterials are typically passive in design and require external forces to make or break connections. However, by integrating shape memory alloys, particularly nickel-titanium alloys, a team of researchers at Texas A&M University has successfully realized active Interlocking Lattices Metamaterials that can open or close automatically at specific temperatures.

 

Unit structure with two Interlocking Lattices Metamaterials
Unit structure with two Interlocking Lattices Metamaterials
 
Research Methodology

 

● The research team designed and fabricated two different configurations of Interlocking Lattices Metamaterials arrays using near-isoatomic-ratio Ni-Ti powders and Laser Powder Bed Fusion (L-PBF) 3D printing technology.

 

● To ensure the quality of the printed parts, the research team followed a systematic process optimization framework, starting with single-track experiments, building analytical models step by step, and ultimately constructing a print feasibility map.

 

● In addition, the research team utilized Finite Element Analysis (FEA) to predict the strain values generated during the join-disconnect cycle.

 

Through thermo-mechanical testing, it was found that the prepared Interlocking Lattices Metamaterials assemblies exhibited extremely high locking force in the joined state, along with full shape recovery and good cyclic stability. The accuracy of the FEA prediction was further verified by Digital Image Correlation (DIC). Optical microscopy analysis shows that the printed parts are virtually defect-free with a density of more than 99.9%, indicating that the L-PBF technology can effectively fabricate high-quality Ni-Ti alloy Interlocking Lattices Metamaterials.

 

Digital Image Correlation
(a) 3D modeling and simulation of the pinch grip (PG) design unit structure with equivalent strain using Solidworks Nitinol material model;
(b) 3D model of the PG design fabricated using near-equivalent-atomic-scale Nitinol alloy;
(c) 3D modeling and simulation of the extended anchor (EA) design unit structure with equivalent strain;
(d) 3D modeling of EA design using near-equivalent atomic scale Ni-Ti powder 3D printing.

 

Application Prospects

 

This new technology not only improves the connection strength and stability of structural components, but also offers new possibilities for the design of intelligent, adaptive structures. For example, in aerospace, active Interlocking Lattices Metamaterials can be used to design reconfigurable vehicle components; in robotics, it can provide more flexible and adaptive joints; and in biomedical devices, it can adjust the state of implants and prostheses according to changes in body temperature and body movement, thus providing better treatment for patients.

Send Inquiry
WITH OUR PRODUCTS,FULLFILL YOUR DREAMS
We can provide a variety of options
for car tuning enthusiasts
contact us