Four Challenges in Processing Thin-walled Titanium Alloy Parts
Thermal deformation problem: Titanium alloy has poor thermal conductivity, and heat accumulation is easy to occur during processing, causing deformation of parts.
Blade stress concentration: Although titanium alloy has low cutting force, its contact area is small, which makes the blade bear large stress per unit area and prone to chipping.
Chemical activity effect: Titanium alloy easily reacts with gases in the air at high temperatures to form a hard and brittle outer skin, which affects the fatigue strength of parts.
Cutting force mutation problem: When processing rounded corners, the change in contact area between the tool and the workpiece causes a sudden increase in cutting force, which is easy to cause vibration and processing defects.
Five magic weapons for solutions
Tool selection: Use tungsten-cobalt (YG) carbide tools, and select tools with different cobalt contents according to processing requirements to adapt to different processing stages.
Improve rigidity: Reduce tool vibration during rounded corner cutting by improving clamping methods and improving clamping stability.
Cooling scheme optimization: Use coolants such as emulsion, extreme pressure emulsion, extreme pressure cutting oil or extreme pressure water solution, or use micro-lubrication technology (MQL) to effectively reduce cutting temperature and increase tool life.
Cutting path refinement: Optimize tool processing path, keep the cutting angle constant, and avoid sudden changes in cutting force.
Constant feed speed: During the rounding process, keep the feed speed of the tool cutting part constant to ensure processing quality.
CNC milling of rounded corners of titanium alloy thin-walled parts is a technology-intensive process that requires engineers to have not only deep theoretical knowledge but also rich practical experience.
Through the above-mentioned difficulty analysis and solutions, we can better master this process, thereby improving the processing accuracy and quality of parts.

