Titanium, the metal known for its high strength-to-weight ratio, exceptional corrosion resistance, and biocompatibility, has a wide range of applications that rely heavily on the process of efficient and high-purity extraction and refining from ore raw materials. Titanium in nature mainly exists in the form of rutile (TiO₂) or ilmenite (FeTiO₃), and converting these ores into usable pure titanium is a complex and energy-intensive project, and the core challenge is that titanium is very easy to react violently with oxygen, nitrogen, carbon and other elements at high temperatures to form stable compounds, which makes traditional smelting reduction methods almost impossible to apply directly. Therefore, the mass production of pure titanium (especially titanium sponge) in industry mainly relies on the Kroll method and its derivative process, and its core idea is to first convert titanium into a volatile intermediate compound - titanium tetrachloride (TiCl₄), and then reduce and purify the high-purity intermediate.
The purification journey begins with the enrichment and chlorination of titanium ore. ilmenite or rutile is first enriched by beneficiation to increase the TiO₂ content. Titanium-rich materials (such as natural rutile, artificial rutile or high titanium slag) are then chlorinated in fluidized bed reactors with coke and chlorine at high temperatures (about 900-1000°C). This violent exothermic process converts titanium oxides into gaseous titanium tetrachloride (TiCl₄), and impurities such as iron in the ore also produce corresponding chlorides (such as FeCl₃). The newly produced crude TiCl₄ is a complex mixture containing impurities such as silicon, vanadium, iron, aluminum, magnesium, and chloride, especially vanadium impurities (VOCl₃, VCl₄) that are similar to titanium properties, which are the most difficult to separate, so strict distillation and purification are necessary. Using the differences in the boiling points of various chlorides, the impurities with low boiling points (such as SiCl₄) were first removed, and the impurities with high boiling points (such as FeCl₃ and AlCl₃) were enriched and removed in the subsequent kettles. For vanadium, a key impurity, chemical treatment methods are often used, such as adding a reducing agent (such as mineral oil or hydrogen sulfide) to liquid TiCl₄ to reduce V⁵⁺ to V⁴⁺, and then passing hydrogen sulfide to form an insoluble sulfide precipitate (such as VOS), or adding metal reducing agents such as copper powder to selectively reduce it to a low-valence state and then adsorption and filtration to remove it. This series of fine distillation and chemical treatments results in a colorless transparent liquid titanium tetrachloride with extremely high purity (typically required >99.9%), which is a qualified raw material for subsequent reduction steps.
After obtaining high-purity TiCl₄, it enters the reduction process to produce titanium metal, and the mainstream process is magnesium thermal reduction. A large steel reactor (reduction furnace) protected by inert argon gas is filled with a sufficient amount of molten magnesium (Mg). The refined liquid TiCl₄ is slowly injected or sprayed into a molten magnesium bath at a temperature of about 800-900°C at a tightly controlled rate. The key reactions that occur are: TiCl₄(g) + 2Mg(l) → Ti(s) + 2MgCl₂(l). This is an intense exothermic reaction that requires precise control of the feeding rate and temperature to avoid overheating or flying temperatures. The titanium metal produced by the reaction is not in a molten state, but is deposited in a loose and porous solid form on the inner wall of the reactor or on the steel basket in the center, forming the so-called "titanium sponge", and the molten magnesium chloride (MgCl₂) produced floats above the molten magnesium layer because its density is lower than that of magnesium. After the reaction, the entire reactor is slowly cooled under argon protection. The cooled reactor contains titanium cavernosum, residual magnesium (unreacted), and solidified magnesium chloride. To separate these components and further purify the titanium sponge, vacuum distillation is required. The reactor as a whole or the removed sponge blocks are placed in a special vacuum distillation furnace and processed for a long time under high temperature (approx. 920-1010°C) and high vacuum (less than 0.1 Pa). In this environment, the residual magnesium and magnesium chloride are preferentially volatilized due to their high vapor pressure and are condensed and trapped in the cooling zone of the furnace, while titanium has a very low vapor pressure and is almost non-volatile, so it can be retained and purified. Vacuum distillation can effectively remove residual magnesium, magnesium chloride, hydrogen adsorbed in the pores of the cavernous body, and finally obtain massive porous titanium sponge with a purity of usually 99.5% to 99.7%. As an alternative, sodium thermal reduction is similar in principle, using metal sodium to reduce TiCl₄ with the reaction of TiCl₄ + 4Na → Ti + 4NaCl. The sodium method has a low reaction temperature (about 550-600°C), and the sodium chloride produced is more soluble in water and washed away, but it needs to treat a large amount of sodium salt wastewater, and the operation with high sodium activity requires more caution.
Titanium sponge obtained by the Crower process (magnesium or sodium reduction) and vacuum distillation, although the purity is very high, still contains trace gap impurities (oxygen, nitrogen, carbon) and residual chloride, and is in a porous and loose state. In order to obtain industrial titanium ingots with denseness, uniform composition, lower impurity content, and excellent mechanical properties, it is necessary to melt and purify them. Vacuum self-consuming electrode arc furnaces are usually used for melting. First, the titanium sponge is crushed and screened, and the alloying elements (such as Al, V, etc.) are accurately matched according to the required alloy composition, mixed evenly, and pressed into electrode blocks under huge pressure, and then multiple electrode blocks are welded into sufficiently long self-consuming electrodes. The electrode is placed in a vacuum or inert gas (argon or helium) protected atmosphere furnace chamber of a water-cooled copper crucible, and the arc is ignited between the electrode and the ingot plate at the bottom of the crucible. The powerful arc heat melts the electrode tip, and the molten droplets fall into the crucible to form a melt pool and solidify into ingots. The entire process is carried out in a vacuum or inert atmosphere, effectively preventing the oxidation and nitriding of titanium. More importantly, in the molten state, some impurities with high vapor pressure (such as residual MgCl₂, partial oxygen, hydrogen, etc.) will be further volatilized and removed, and the solidification process of the melt pool is also conducive to the segregation and removal of impurities. For high-end applications that require extreme purity and uniformity, such as aero engine blades, two or even three vacuum self-consuming arc melting is usually required, each melting further improves the purity, uniformity and density of the titanium ingot, and finally obtains large titanium alloy ingots with extremely low impurity content (such as oxygen content can be controlled below 0.1%), uniform and dense structure, and excellent performance, providing high-quality raw materials for subsequent rolling, forging and other processing processes.
In summary, the purification of titanium is a complex system engineering that incorporates multidisciplinary techniques such as high-temperature chemistry, precision separation, vacuum metallurgy, and electrometallurgy. From the chlorination of ore to obtain pure TiCl₄, to the magnesium/sodium reduction combined with vacuum distillation to produce titanium sponge, to the multiple vacuum arc melting to cast high-purity dense titanium ingots, each step aims to tame the high chemical activity of titanium, eliminate the intrusion of impurities such as oxygen, nitrogen and carbon, and finally transform the potential contained in the ore into "space metals", "marine metals" and "biophilic metals" that support cutting-edge fields such as aerospace, marine engineering, and biomedicine, showing its unique value as a modern industrial pearl.If you want to know more titanium information,pls contact catherine@hiriger.com.
