Products Description
|
Product Name: |
Gr1 Titanium Foil |
|
Thk: |
0.01mm-1mm |
|
Specification: |
GB/T3622-2012 ,ASTM B265 |
|
Wide: |
100mm-300mm |
|
Material: |
GR1 Titanium |
Gr1 Titanium Foil is a thin sheet material made of pure titanium, titanium foil has excellent corrosion resistance, good plasticity and processability, and can resist the erosion of strong corrosive media such as acids and alkalis, so it is often used to manufacture filler materials for corrosion-resistant devices and equipment. For example, in the pharmaceutical, fertilizer, petrochemical and other industries, it is often necessary to use corrosion-resistant fillers to ensure the normal operation of equipment. As an ideal filler material, titanium foil can effectively block the erosion of corrosive media and prolong the service life of equipment.
Chemical Composition
|
C |
N |
H |
Fe |
O |
Residuals Elelement |
|
|
≤ |
≤ |
≤ |
≤ |
≤ |
Each ≤ |
Total ≤ |
|
0.08 |
0.03 |
0.015 |
0.30 |
0.25 |
0.1 |
0.4 |
Mechanical Property
|
Tensile Strength |
Yielded Strength |
Elongation |
|
|
240MPa Min |
138MPa Min |
310MPa Max |
24 % Min |
HIGH-QUALITY PURE TITANIUM COMES FROM THE TIHRJ FACTORY
Grade 1 titanium consists of 99.6% pure titanium with very few traces of other elements. This high-purity GR1 titanium foil has excellent corrosion resistance, especially in highly oxidizing environments. With a density of 4.51 g/cm³, GR1 weighs about half as much as steel, but still retains considerable strength and performance.
Hot Tags: gr1 titanium foil, China gr1 titanium foil manufacturers, suppliers, factory, NPT Bung, valves, Titanium Exhaust for Audi, Titanium 90 Radius Elbow, pie cuts, Muffler End Cap
